BVRHY - DPE1537 ZINC CHROMATE PRIMER YELLOW

  • MSDS: BVRHY
  • Manufacturer: PPG INDUSTRIES
  • Product Name: DPE1537 ZINC CHROMATE PRIMER YELLOW
  • National Stock Number: 8010-00F006628
Product Identification

Product ID:DPE1537 ZINC CHROMATE PRIMER YELLOW
MSDS Date:06/29/1994
FSC:8010
NIIN:00F006628
MSDS Number: BVRHY

Responsible Party
PPG INDUSTRIES
4325 ROSANNA DR
ALLISON PARK, PA 15101-5000
US

Emergency Phone: 304-843-1300/412-492-5555

Info Phone: 412-492-5555/304-843-1300

Cage: PPGIN

Contractor
PPG INDUSTRIES
ALLISON PARK, PA 15101-5000 US

Telephone: 412-492-5555/304-843-1300

Cage: PPGIN

Ingredients

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE

CAS: 64742-89-8

Fraction By Weight: 2-5%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


FILM, FORMERS, RESINS & ADDITIVES

Fraction By Weight: 25-30%


CHROMIUM VI, ION (CR 6+) (OSHA CARCINOGEN); SOLUBLE

CAS: 18540-29-9

RTECS: GB6262000

Fraction By Weight: 2-5%

OSHA PEL 0.1 MG/CUM

ACGIH TLV: 50 UG/CUM (A1)


CHROMIUM COMPOUNDS (TYPE NOT SPECIFIED)

Fraction By Weight: 20-25%


ZINC COMPOUND

Fraction By Weight: 20-25%


POTASSIUM ZINC CHROMATE (HUMAN CARCINOGEN BY ACGIH, IARC -

CAS: 11103-86-9

RTECS: GA9170000

Fraction By Weight: 20-25%

ACGIH TLV: 0.01 MG/CUM


TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 2-5%

OSHA PEL 2 MG/CUM

ACGIH TLV: 2 MG/CUM (RESP DUST)


XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 40-45%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
IRRITATION. SKIN: PRIMARY IRRITATION. PROLONGED/REPEATED CONTACT
MAY CAUSE ALLERGIC SKIN REACTION. INHALATION: VAPOR/SPRAY
MIST/SANDING/GRINDING DUST HARMFUL. RE PEATED EXPOSURE TO HIGH
VAPOR CONCENTRATIONS CAUSES RESPIRATORY IRRITATION/PERMANENT
BRAIN/NERVOUS SYSTEM DAMAGE. (SUPP)
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION, WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, REDNESS,
SWELLING

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
WATER, FOLLOW W/WATERLESS HAND CLEANER, SOAP & WATER IF MATERIAL
APPEARS TO ADHERE TO SKIN. INHALATION: REMOVE TO FRESH AIR. GIVE
CPR IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:81F
Lower Limits:1
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM
Fire Fighting Procedures:WEAR SCBA. WATER SPRAY MAY BE INEFFECTIVE BUT
MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
NOZZLES ARE PREFERRABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. EVACUATE AREA.
REMOVE ALL IGNITION SOURCES. TAKE UP W/SAWDUST, VERMICULITE/OTHER
ABSORBENT MATERIAL & PLACE INTO CONTAINERS FOR DISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE ABOVE 120F. KEEP
CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS, OPEN FLAMES. DON'T APPLY TO HOT SURFACES.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT SYSTEM,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING
MIXTURE MAY HAVE HAZARDS OF ALL OF ITS PARTS. GROUND CONTAINERS
WHEN POURING. AVOID FR EE FALL OF LIQUIDS >A FEW INCHES.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED AIR PURIFYING/AIR SUPPLIED
RESPIRATORS TO REDUCE OVEREXPOSURE TO VAPORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
CONCENTRATION OF CONTAMINANTS Protective Gloves:NITRILE/NEOPRENE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:NITRILE/NEOPRENE RUBBER APRON
Supplemental Safety and Health
HEALTH HAZARDS CONT'D: INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING/INHALING CONTENTS CAN BE HARMFUL/FATAL. PRODUCT
EITHER CONTAINS FORMALDEHYDE/IS CAPABLE OF RELEASING ABOVE 0.5 PPM
& IS A POTENT IAL CANCER HAZARD/SKIN/RESPIRATORY SENSITIZER.
BOILING POINT: 199.4-381.2F.

Chemical Properties

Boiling Pt:B.P. Text:(SEE SUPP)
Vapor Pres:9
Vapor Density:>1
Spec Gravity:1.16
Evaporation Rate & Reference:(BU O AC =100): 78
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID W/CHARACTERISTIC SOLVENT ODOR
Percent Volatiles by Volume:62.8

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, SOURCES OF IGNITION, HOT
SURFACES
Hazardous Decomposition Products:CO, OXIDES OF CHROMIUM, ZINC OXIDE

Disposal

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. WASTE MATERIAL MUST
BE DISPOSED OF IAW/FEDERAL, STATE & LOCAL ENVIRONMENTAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.